JJTOOLS

Thread selection

Machining operation

Entry / return / side machining

Linking parameters

Program (code)

Thread mill group

Number of cutting edges (1)

Return speed

Inclination angle

Tolerance (overcut)

LOOP cutting length

Chamfer amount (max.)

Chamfer start diameter

Shank

Internal coolant

Helicoil

Start at the arc centre

Finish at the centre

Normal entry / return

Apply helical entry / return upward

Apply helical entry / return downward

* Select thread type

* Select thread standard

Standard: R262 (DIN 13)
Tolerance class: 6H

* Thread information

* Tool data

Overall dimensions

Thread type

Thread standard

Outside diameter

Pitch (mm/TPI)

Overall length (mm)

Cutting length (mm)

Thread machining type

Recommended thread mill

* [Required] Workpiece material Select

Machining conditions

N(S) - Spindle speed (rpm)
Vc - Cutting speed (m/min)
D2 - Thread (tool) diameter (mm)
F1 - Feed (mm/min)
Zf - Flutes
fz - Feed per tooth (mm/tooth)

Machining operation

Helicoil machining

Thread pitch (mm)

Thread-tool teeth (nick type = 1)

Inclination angle

Thread (tool) diameter (mm)

Vc = Cutting speed (m/min)

fz = Feed per tooth (mm/tooth)

fd = Drills Feed per tooth (mm/tooth)

Z-axis feed rate (mm/min)

F1 = Feed rate (mm/min)

dvf = Drilling feed rate (mm/min)

N(S) = Spindle speed (rpm)

Tool length offset number (H)

Tool diameter offset number (D)

Dental (air / high-frequency spindle)

Cutting entry / return

Controller type

Entry / return

Thread start angle

Entry feed rate (%)

Entry / return arc Z height

Entry / return line length

Entry / return arc angle

Side machining

Roughing passes

Roughing allowance

Finishing passes

Finishing allowance

Finishing repeat count

Finishing feed rate (mm/min)

Finishing spindle speed (rpm)

Compensation type

Select controller

Parameters

Safety height(L)

Apply to first / last operation

Transfer height(A)

Entry height(F)

Top of thread(T)

Thread depth(H)

Drilling depth

└ Peck drilling